PORSCHE 996 TURBO PORSCHE O RING
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 944 1985-88 (includes uncategorized and accessory items)
Lowers the ride height by 30 mm (1.2 inches) in the front and 30 mm ( 1.2 inches) in the rear.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Known as: clutch release lever
View/Change Diagram
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
View/Change Diagram
From $82.50
Make a selection
Turbocharger to support / turbocharger to lower oil line
View/Change Diagram
From $7.75
Make a selection
Ohne logo
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 944 1982-85 944 1985-88
From $326.99
Make a selection
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Sold as a set. 1 necessary per car.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$1,186.90
Make a selection
4 required
Known as: sealing ring / sealing ring a 12 x 15,5
View/Change Diagram
From $1.00
Make a selection
Sold as a set. 1 necessary per car.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
From $1,562.88
Make a selection
Twintube strut assembly setting: b8 sport (sp) drive type: awd position: front quantity per vehicle: 2 bilstein b8 sport shocks and struts deliver absolute mastery of the road surface for the performance-minded driver. Designed to push a car's suspension to its performance peak, these shocks are specifically suited for use with special lowering springs in combination with anti-sway bars or other suspension upgrades. (yellow paint, steel body)
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
4 spoke steering wheel recovering kit for cars with airbag. This part has a 2-3 week lead time.
General Fitment 968 1992-95 944 1989-91 944 1985-88
Known as: coil spring 1 set identification
View/Change Diagram
Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche®.
The correct brake pad can make the difference between winning and losing. Pagid race pads are only for racing.
Correct brake-in after refreshing the brake pads:
* 3 to 4 brake applications with medium pedal pressure from 100 mph to 50 mph. Allow 900-1500 feet cooling time between brake applications.
* 2 to 3 brake applications with harder pedal pressure from 110 mph to 60 mph. Allow 1500 feet cooling time
Between brake applications. Avoid wheel lock-up and abs.
* 1 to 2 in-between clean-up brake applications. Do not allow the brake pads to overheat during the break in period.
Yello...(choose a part on the right to read more)
General Fitment 911 1994-98 968 1992-95 911 1989-94 944 1982-85 944 1985-88 928 1992-95 911 1970-73
From $310.58
Make a selection
Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche®.
The correct brake pad can make the difference between winning and losing. Pagid race pads are only for racing.
Correct brake-in after refreshing the brake pads:
* 3 to 4 brake applications with medium pedal pressure from 100 mph to 50 mph. Allow 900-1500 feet cooling time between brake applications.
* 2 to 3 brake applications with harder pedal pressure from 110 mph to 60 mph. Allow 1500 feet cooling time
Between brake applications. Avoid wheel lock-up and abs.
* 1 to 2 in-between clean-up brake applications. Do not allow the brake pads to overheat during the break in period.
Blue:...(choose a part on the right to read more)
General Fitment 911 1994-98 968 1992-95 911 1989-94 944 1982-85 944 1985-88 928 1992-95 911 1970-73
From $241.68
Make a selection
Highlights:
Made for up to 750°c (1,382°f) for street, some track use and rally use.
Low dust, high performance street pad with 20-25% % brake improvement.
Capable of repeated heavy brake use without brake ?fall-off?.
Very minimal disc/rotor damage characteristics.
Features red ?brake in? Surface coating for instant safe braking after install.
Superb material for European cars.
Ece r 90 type approved for most cars.
High performance lowest dust rating pads for prestige imports and faster street driving.
Redstuff reduce dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like ...(choose a part on the right to read more)
General Fitment 911 1994-98 968 1992-95 911 1989-94 944 1982-85 944 1985-88 928 1992-95
From $264.97
Make a selection
FVD diverter valve is a direct replacement for the OEM valve. Comes in black only, not blue.
Prevents boost leaks and "recovers" quicker for better boost and throttle response.
Why replace the OEM diverter valve with an "FVD diverter valve"?
Under higher boost pressures the Bosch valve can start to leak (plastic housing). The plastic cover begins to lift off the sealing face as the internal spring's resistance is exceeded. Our diverter valve is made out of aluminum.
Between shifts or sudden throttle lift-off the compressor wheel is still spinning very fast and pumping air at the closed throttle plate, as well as placing strain on the intercooler, hoses and fittings. The diverter valve keeps air f...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 911 1994-98 911 1989-94 911 1987-89 944 1985-88
Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche®.
The correct brake pad can make the difference between winning and losing. Pagid race pads are only for racing.
Correct brake-in after refreshing the brake pads:
* 3 to 4 brake applications with medium pedal pressure from 100 mph to 50 mph. Allow 900-1500 feet cooling time between brake applications.
* 2 to 3 brake applications with harder pedal pressure from 110 mph to 60 mph. Allow 1500 feet cooling time
Between brake applications. Avoid wheel lock-up and abs.
* 1 to 2 in-between clean-up brake applications. Do not allow the brake pads to overheat during the break in period.
Orang...(choose a part on the right to read more)
General Fitment 911 1994-98 968 1992-95 911 1989-94 944 1982-85 944 1985-88 928 1992-95 911 1970-73
From $321.20
Make a selection
Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche®.
The correct brake pad can make the difference between winning and losing. Pagid race pads are only for racing.
Correct brake-in after refreshing the brake pads:
• 3 to 4 brake applications with medium pedal pressure from 100 mph to 50 mph. Allow 900-1500 feet cooling time between brake applications.
• 2 to 3 brake applications with harder pedal pressure from 110 mph to 60 mph. Allow 1500 feet cooling time
Between brake applications. Avoid wheel lock-up and abs.
• 1 to 2 in-between clean-up brake applications. Do not allow the brake pads to overheat during the break in...(choose a part on the right to read more)
General Fitment 911 1994-98 968 1992-95 911 1989-94 944 1982-85 944 1985-88 928 1992-95
From $279.84
Make a selection
Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche®.
The correct brake pad can make the difference between winning and losing. Pagid race pads are only for racing.
Correct brake-in after refreshing the brake pads:
* 3 to 4 brake applications with medium pedal pressure from 100 mph to 50 mph. Allow 900-1500 feet cooling time between brake applications.
* 2 to 3 brake applications with harder pedal pressure from 110 mph to 60 mph. Allow 1500 feet cooling time
Between brake applications. Avoid wheel lock-up and abs.
* 1 to 2 in-between clean-up brake applications. Do not allow the brake pads to overheat during the break in period.
Blue:...(choose a part on the right to read more)
General Fitment 911 1994-98 968 1992-95 911 1989-94 944 1982-85 944 1985-88 928 1992-95
From $263.94
Make a selection
Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche®.
The correct brake pad can make the difference between winning and losing. Pagid race pads are only for racing.
Correct brake-in after refreshing the brake pads:
* 3 to 4 brake applications with medium pedal pressure from 100 mph to 50 mph. Allow 900-1500 feet cooling time between brake applications.
* 2 to 3 brake applications with harder pedal pressure from 110 mph to 60 mph. Allow 1500 feet cooling time
Between brake applications. Avoid wheel lock-up and abs.
* 1 to 2 in-between clean-up brake applications. Do not allow the brake pads to overheat during the break in period.
Yello...(choose a part on the right to read more)
General Fitment 911 1994-98 968 1992-95 911 1989-94 944 1982-85 944 1985-88 928 1992-95
From $363.58
Make a selection
Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche®.
The correct brake pad can make the difference between winning and losing. Pagid race pads are only for racing.
Correct brake-in after refreshing the brake pads:
* 3 to 4 brake applications with medium pedal pressure from 100 mph to 50 mph. Allow 900-1500 feet cooling time between brake applications.
* 2 to 3 brake applications with harder pedal pressure from 110 mph to 60 mph. Allow 1500 feet cooling time
Between brake applications. Avoid wheel lock-up and abs.
* 1 to 2 in-between clean-up brake applications. Do not allow the brake pads to overheat during the break in period.
Orang...(choose a part on the right to read more)
General Fitment 911 1994-98 968 1992-95 911 1989-94 944 1982-85 944 1985-88 928 1992-95
From $254.40
Make a selection
Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche®.
The correct brake pad can make the difference between winning and losing. Pagid race pads are only for racing.
Correct brake-in after refreshing the brake pads:
• 3 to 4 brake applications with medium pedal pressure from 100 mph to 50 mph. Allow 900-1500 feet cooling time between brake applications.
• 2 to 3 brake applications with harder pedal pressure from 110 mph to 60 mph. Allow 1500 feet cooling time
Between brake applications. Avoid wheel lock-up and abs.
• 1 to 2 in-between clean-up brake applications. Do not allow the brake pads to overheat during the break in...(choose a part on the right to read more)
General Fitment 911 1994-98 968 1992-95 911 1989-94 944 1982-85 944 1985-88 928 1992-95 911 1970-73
From $251.22
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|